Xtreme 61038, Owner'S Manual And Safety Instructions, Page: 16 / 21

WOOD CHIPPER
16
GB
Support Block
2
3
M8×16
(×9)
1
2
1
M8×20
(×2)
KNIFE REMOVAL AND REPLACEMENT
This chipper is equipped with two chipper knives
that are mounted on the cutting disk. When the
knives are dulling or show nicks, the machine will
lose the self-feeding action. Material will have to
be pushed in. Another indication that the knives
will need to be inspected is the debris that is
discharged will come out in long strips. Below
are the instructions to replace the knives.
1. Remove the deflector bracket.
5. Using Allen key S4 to remove the two screws
on top of engine shaft bushing.
6. Using Allen key S8 to remove the socket
head cap screw fixing the engine shalt.
2. Remove the M8 × 16 bolts and nuts that
connect the rotor housing and rotor disc seat.
3. Put one support block under engine.
4. Detach the rotor housing and hopper from
the rotor disc seat.
3
1
Allen Key S4
2
Allen Key S8
7. If the hammer slicers are damaged, remove
the four M12 × 55 bolts that hold the J-type
hammer slicer and triangle hammer slicer,
and replace.
2 1
Triangle Hammer Slice
J-Type Hammer Slice
M12×55
(×4)
36060UK00M100_BS.indd 16 2019/8/28 14:44:32