background image

IMPORTANT SAFETY INFORMATION

1

GENERAL SAFETY WARNINGS

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible 

conditions and situations that may occur. It must be understood by the operator that common sense and 

caution are factors which cannot be built into this product, but must be supplied by the operator. Read 

carefully and understand all instructions

 

before operating. Failure to follow the safety rules and other 

basic safety precautions may result in serious personal injury.

Use this appliance only for its intended purpose as described in this owner’s manual.

SAVE THESE WARNINGS

CHECK FOR DAMAGED PARTS.

 Before using the Stuffer, check that all parts are operating properly 

and perform the intended functions. Check for the binding of moving parts, mounting and any other 

conditions that may affect the operation. 

KEEP CHILDREN AWAY. NEVER LEAVE THE APPLIANCE UNATTENDED. The Stuffer is NOT A 

NEVER

 store or leave the Stuffer at a temperature lower than 32°F (0°C).

Be sure the Stuffer is stable during use. All four feet should be secure on a level surface. The Stuffer 

should not move during operation. 

NEVER

 operate the Stuffer with the Gear Housing Cover open or removed.

WEAR EYE PROTECTION! 

Everyday eye glasses are not safety glasses. Safety glasses conform to 

ANSI Z87.1 requirements. 

NOTE:

 Approved safety glasses have Z87 printed or stamped on them.

DO NOT USE

 the appliance while under the influence of drugs or alcohol.

Household use only.

Summary of Contents for 95401-XP










Reviews: