2
SAVE THESE WARNINGS
IMPORTANT SAFETY INFORMATION
Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed. Check that the
cutting attachment is firmly attached and in safe operating condition. Dull, loose or damaged blades
should not be used.
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away
from all openings.
DO NOT
start or operate unit unless all guards and protective covers are properly assembled to unit.
NEVER
reach into any opening while the engine is running. Moving parts may not be visible through
openings.
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks
are found,
DO NOT
use unit, otherwise serious personal injury or property damage may occur.
NEVER
store cans of fuel or refill the tank in any place where there is a boiler, stove, fire, sparks or
anything that can ignite the fuel.
When refilling the tank, always turn off the engine first and make sure there are no sparks or open flames
present.
If any fuel spillage occurs during refuelling , use a dry rag to wipe up any spills before turning the engine
back on.
After refuelling, screw the fuel cap back tightly onto the fuel tank and then carry the hedge trimmer to a
spot three meters or more away from where it was refuelled before turning on the engine.
This trimmer is equipped with a centrifugal clutch. The blade doesn’t rotate in a state of idling.
Grip the handles firmly with both hands when the engine is running. Always be sure to maintain steady,
even posture while working.
NEVER
touch the spark plug and wire while the engine is in operation.
While operating and stopping the machine,
NEVER
touch the muffler, spark plug and other metal parts.
