background image

2

READ & UNDERSTAND OPERATOR’S MANUAL

BEFORE USING THIS MACHINE

This symbol is used throughout this manual to warn of hazards or unsafe 

practices which could result in personal injury to yourself or others.

This manual is furnished with each new propane powered Dust Control 

 

machine.

  

It

 

provides

 

necessary operation and maintenance instructions.  Read and understand the information in 

this manual before operating or servicing this machine.  

 

 

Check fuel cylinder for overfill before taking it into the building or placing in 

storage.

 

Install fuel cylinder in a well ventilated place.

 

Be aware of possible leaks of propane gas if odor is present.

 

Check carburetor air filter for cleanness before starting engine.

 

Never allow water to contact hot engine.

 

Never leave the machine unattended while engine is running.

 

Remove fuel cylinder and store outside in an approved cabinet.

 

Secure fuel cylinders when being transported.  If installed on the machine service 

valve must be OFF.

 

Never store fuel cylinders in your van where they may be exposed to high 

temperatures.

 

Maintain the machine as directed by the manufacturer.

 

Only trained operators should be allowed to operate propane powered machines.

This publication is designed to provide accurate and authoritative information in regard to 
the subject matter covered.  It is provided with the understanding that the publisher is not 

engaged in rendering legal or other professional services. 

   

WARNING

Summary of Contents for Genie Presto Pro

















Reviews: