Operation Manual
43
XR5519
Operator Cab
Multifunction Joystick Controller (Joystick)
The joystick is used to raise, lower, extend, retract the boom,
tilt the carriage (or attachment), and sway the machine frame.
Fig 60. Multifunction Joystick Controller (Joystick)
NOTE: The joystick is a variable speed control. Function
speed is proportional to handle movement. The more the
joystick is moved in the appropriate direction, the faster the
corresponding function will occur.
NOTE: Increasing engine speed can increase boom lift,
extend, and carriage tilt speeds.
NOTE: Two (2) boom functions can be performed at the
same time by moving the joystick into the corner between (2)
individual functions (Positions B, D, F or H).
Fig 59. Steering Select Switch
Warning
DO NOT change steering modes until the forklift comes
to a complete stop. Align all four (4) wheels perpendicular
to the axle, before changing steering mode. Changing
steering modes at higher travel speeds can make the forklift
unstable, and cause a loss of control, which could result in
death, serious injury, or property damage.
Windshield Wiper / Washer Switch
This switch is available only on enclosed cab models.
Fig 58. Wiper Switch
Steering Mode Select Switch
The reach forklift includes three STANDARD modes of
steering:
Sway
Enable
Button
Tilt Thumbstick
Aux Button 1
Aux Button 2
Joystick
Enable
Trigger
Select the appropriate steering mode using the Steering
Select rocker switch. The status of this switch can be viewed
and/or monitored on the touchscreen, in the Steering Cluster
within the Main Switch cluster screen. This screen is accessed
from the Settings screen, touching the CAN Switches button.
See the
SETTINGS - CAN Switches
paragraph for mode details.
·
Two Wheel (2W)
·
Four Wheel (4W)
·
Crab Steering
18408-001
AUX
CONTROL
AUX
CONTROL
FORK TILT
DOWN
FORK TILT
UP
JOYSTICK
ENABLE
BOOM
RETRACT
SWAY
LEFT
BOOM
EXTEND
SWAY
RIGHT
SW
AY
ENABLE
BOOM
LOWER
BOOM
RAISE
