4
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
1. General Description
XG2
is 10Gbps Ethernet media converter
between optical fiber and copper wire. No
matter what kind of media applied for 10Gbps
Ethernet, it used to be the optical fiber as the
media for transmission. Until recently,
10GBASE-T that based on IEEE 802.3an which
was formally announced at June 2006, uses
Cat.6a/Cat.7 cable as transmission media with
RJ-45 connector becomes a commercial
standard in the market. With this kind of
revolutionary and cost-effective solution, 10Gbps speed Ethernet transmission is not as costly as
optical fiber before.
However, the possible transmission length of 10GBASE-T is up to 100 meter only, hence, data
transmission between two far away places with 10GBASE-T is not possible. Using fiber as the
media still dominates transmission of long distance. How will you configure network between
these two media? Here comes the XG2 for the best solution.
XG2 is a media converter for connection between 10GBASE-R and 10GBASE-T. For example,
administrator of ISP can has FTTx service from Central Office to the user’s street or large
organization building by fiber. Without extra equipment specialized for fiber, XG2 convert media
from fiber to copper wire, and then distributed to any nearby location with 10Gbps Ethernet
switch, or to xDSL modem via DSLAM. Data stream can be transmitted with copper wire cable
easily and cost effectively afterward.
XG2 is a two ways converter with RJ-45 and SFP+ connector. Data stream can be converted
bi-directionally from 10GBASE-R to 10GBASE-T and vice versa. With full duplex Wirespeed
forwarding capability between these two media, XG2 bring you the best and simple solution for
the 10Gbps Ethernet conversion between media of copper wire and fiber.
Summary of Contents for XG2
Page 1: ...XG2 User Manual USM V1 0 ...