12
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
Optical Fiber:
As the description above, there are Single-mode and Multi-mode optical fiber. Both of them can
be used for XG2
Fiber Connector:
Unlike RJ-45 connector, the fiber can be removed from SFP+ transceiver easily. At two ends of
fiber, it has connector that can attach to SFP+ transceiver. There are two fibers for one SFP+
transceiver. One fiber is for receiving and one fiber is for transmission. The picture below is
called LC connector that can attach to SFP+ transceiver.
Transceiver (Connector):
SFP+ Transceiver is the hardware that is pluggable into the body of XG2. Unlike RJ-45
connector that there is no component inside at all, SFP+ Transceiver is an active component that
consumes power from XG2 and it has the key function that convert signals between optical data
flow and electronic data flow.
A
: Handgrip to remove module from XG2 easily
B
: Connection from LC fiber connector that is described above
C
: Bottom of the transceiver module
D
: Electronic conductor to XG2 body
E
: Size of matchstick.
For different transmission purpose, the component inside SFP+ form factor can be 10BASE-LR
or 10BAST-SR mode.
When SFP+ transceiver is plugged into the XG2, the LED of SFP+ is Amber. If the inserted SFP+
transceiver is attached by a fiber with LC connector with going on signaling, the LED becomes
Green. The LED of LR is either Green for 10BASE-LR mode or Amber for 10BASE-SR mode.
Details are shown at the table below
A
B
C D
E
Summary of Contents for XG2
Page 1: ...XG2 User Manual USM V1 0 ...