Media Type
•
Media Type:
You can set the connection speed here
with the scroll-down menu.
•
Link Down Time:
The connection link between DUT
and NuStreams-P6GW will be forced to terminate when
this function is enabled.
•
Link Wait (Minimum):
NuStreams-P6GW will attempt
to establish connection with the DUT and wait for the
minimum time (seconds). NuStreams-P6GW will keep
waiting until the minimum time is met even the DUT has
already responded.
•
Link Wait (Time Out):
NuStreams-P6GW will attempt
to establish connection with the DUT and wait for a
period of time until time out (second), and
NuStreams-P6GW will not attempt to establish
connection anymore.
•
Testing LAN Ports:
Please connect the DUT with
NuStreams-P6GW’s Switch Ports
with Cat-5 cables according
to the
Testing LAN Ports
you set here.
Connection Setting
•
WAN Link Type:
Choose the WAN connection type for
DUT testing. Three WAN Link Types are available:
DHCP
,
Static IP
, and
PPPoE
. The
WAN Link Type
set
here must be the same with the setting of the DUT.
•
DUT WAN Static IP:
If the
WAN Link Type
is set as
Static IP
, please input the static IP address you set in
the DUT here.
•
Connection Wait Timeout:
This function sets the
duration of time for attempting to establish connection
with DHCP server.
•
WAN Gateway IP:
If the
WAN Link Type
is set as
Static IP
, please input the gateway IP address you set
in the DUT here.
•
Check Vender ID:
Enable this function to check DUTs’
MAC address and see if they match DUT vender’s
designated MAC address.
•
Skip DHCP Process if Valid:
Disable or enable DHCP
server.
•
Vendor MAC:
If
Check Vender ID
is enabled, please input the vender’s designated MAC address here for
comparisons.
VLAN Setting
•
LAN VLAN Tag:
Add VLAN tags to all LAN packets.
•
LAN VLAN ID:
VLAN ID for LAN.
•
WAN VLAN Tag:
Add VLAN tags to all WAN packets
•
WAN VLAN ID:
VLAN ID for WAN.
Test Traffic
•
Packet Length:
Length of testing packets.
•
Delay Time After Learning:
When enabled,
NuStreams-P6GW will halt for the set amount of time
after performing network learning.
•
Test Time:
The duration of time for DUT test.
•
Delay Before Report:
When enabled,
NuStreams-P6GW will halt for the set amount of time
before report.
•
Learning Time:
The time for the Nustreams-P6GW to
learn the information received from DUT.
•
Switch Utilization (%):
The traffic flow for Switch
transmission rate, presented in percentage (1~100).
•
Test Delay:
When enabled, NuStreams-P6GW will halt
for the set amount of time before starting DUT test.
•
WAN to LAN Utilization (%):
The traffic flow ratio from
WAN to LAN, presented in percentage (
1~100
).
•
ill drop if traffic overflow occurs.
•
o from
LAN to WAN, presented in percentage (
1~100
).
Flow Control:
When
Flow Control
is enabled, the
transmitting rate w
LAN to WAN Utilization (%):
The traffic flow rati
Pass/Fail Criteria
•
st
packets
in data transmitting during tests (
0~9999
).
•
r of
kets
in data transmitting during tests
(
0~9999
).
Loss Tolerance (pkts):
The acceptable number of
lo
Excess Tolerance (pkts):
The acceptable numbe
excess
pac
Apply Run
•
Click this button to apply all the settings you’ve made and save the settings to NuStreams-P6GW.
* Note: It is recommended to perform WLAN tests in a shielding room.
Note: When WLAN is enabled, NuStreams-P6GW will attempt to connect with the first WAP
(Wireless Access Point) that appears in i
*
ts SSID list. If that WAP is encrypted, NuStreams-P6GW
will apply the password you input here.
47
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®