Xtramus NuStreams-P6GW User Manual Download

Page: 32 / 78

E-mail: [email protected]

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

5.2.2. NuSet-MiniPG Overview

After starting NuSet-MiniPG as mentioned in “

5.2.1. Starting NuSet-MiniPG

”, a

NuSet-MiniPG

Option

Menu

will pop up as shown in the figure down below:

Utility

Description

A NuSet-MiniPG-Config

Utility designed for setting test criteria and accessing test
results/statistics.

B NuSet-MiniPG-ST

Utility designed for testing network switch

NuSet-MiniPG-RT

Utility designed for testing residential gateway (router)

NuSet-MiniPG-RST

Utility designed for testing network switch and residential gateway
(router)

E NuSet-MiniPG-UG

Utility designed for upgrading NuStreams-P6GW and NuPAD’s firmware,
FPGA and hardware license.

Exit

Close NuSet-MiniPG.

*Only ONE utility can run at the same time, and NuSet-MiniPG can only work with ONE device.

You have to install different utilities in order to access different test modes listed on the

NuSet-MiniPG

Option Menu

. Test modes without the proper utilities installed will be displayed as gray in color and

cannot be accessed from the

NuSet-MiniPG Option Menu

When clicking an accessible option from NuSet-MiniPG

Option Menu, a

Device Selection

window will pop up, and

prompt you to choose the device that will be used for testing.

Please choose Nustreams-P6GW from the scroll-down menu,

and click

Note:

Please note that this user’s manual will be focusing on NuSet-MiniPG-Config, NuSet-MiniPG-UG,

and NuSet-MiniPG-ST only. The NuSet-MiniPG-RT and NuSet-MiniPG-RST are still not available.

Summary of Contents for NuStreams-P6GW















































































Search results

Summary of Contents for NuStreams-P6GW

Reviews:

Related manuals for NuStreams-P6GW

Brands by name

Popular brands

Xtramus NuStreams-P6GW, User Manual

Search results

Summary of Contents for NuStreams-P6GW

Reviews:

Related manuals for NuStreams-P6GW

Brands by name

Popular brands