6
8
1
EASY INSTALLATION:
EASY REMOVAL:
Remove cover by pushing
catch in and up.
Remove the remaining liners
ready to stick on the surface.
Allow space on either side for
removal. Press the light firmly
to the surface for 30 secs.
Grab the edge of the light and
peel away from the surface.
Do not pull straight off.
Stretch each strip slowly and
straight against the surface
not away from it to release.
Place 3x AA batteries inside the
unit (batteries not included).
Ensure surface is clean from
dust and grease (do not use
household cleaners).
Separate strips. Press two
strips together until they
click.
The battery saving dusk to
dawn sensor will disable the
motion sensor during the
hours of daylight.
Remove one side of the liners
and stick each pair of strips as
shown. Press firmly.
The light turns on when
motion is detected and turns
off after 30 secs of no
movement.
2
AA
AA
AA
4
5
3
7
2
1
Dimensions: 152mm x 63.5mm x 28mm
Weight: 91g
LED qty: 6
Lamp wattage: 0.41W
Lamp CCT: 4000K
Lumens: 80
Lamp life: 30000hrs
Battery type: (3) AA batteries
Sensor: PIR (Motion Activated)
Auto shut off: 30 seconds
Indoor use only
Motion Sensor
Dusk to Dawn
Sensor
