Xtralis Power Supplies VPS-215-E & VPS-220-E Installation and Commissioning Instructions
www.xtralis.com
Approved Document No. DFU0002150 Rev 3
www.xtralis.com
Page 2 of 2
Legend
Description (UK)
Description (FR)
Beschreibung (DE)
Descriptiόn (ES)
Descrizione (IT)
Value
①
AC supply
230Vac, 50/60Hz (10% / -15%)
②
AC supply input terminals
L=LIVE, N=Neutral,
=Earth
③
PSU earth strap: connect to enclosure
earth tag
PSU is CLASS 1 AND MUST BE EARTHED
④
AC supply fuse (F1): high rupturing
capacity, ceramic
1A HRC, 20mm
⑤
Red LED:
Hazardous voltages in PCB
hashed area
Hazardous voltages =
⑥
PLK1 Charge current link. Remove if
using batteries <7Ah (Minimum 2Ah)
PLK2 Battery monitoring link. Fit if
batteries NOT used
⑦
Power output (maximum and battery cut
off voltage)
24Vdc (V max = 30V, V min = 19.5V)
I max a & I max b with PLK1 fitted
0.5A
I max a & I max b with PLK1 NOT fitted
1A (non EN54-4 certified)
Output ripple voltage (peak-to-peak)
1.2V@30MHz bandwidth, 600mV 100nF loading
⑧
Battery connection to VRLA batteries
Maximum internal battery resistance
Ri max = 1500mΩ
I min: Monitoring current in load shed
<12mA
AC supply/battery charger monitored
Batteries monitored
Charging is temperature compensated
VPS-215-E battery size (Yuasa NP type
or equivalent)
2 x 12V, 7Ah (NP7-12)
VPS-220-E battery size (Yuasa NP type
or equivalent)
2 x 12V, 7Ah (NP7-12) or
2 x 12V, 12Ah (NP12-12) or
4 x 12V, 7Ah (NP7-12)
⑨
VPS-215-E indications: Internal only.
Output OK (Green LED), Fault (Yellow LED)
Output OK =
Fault =
VPS-220-E indications: External only.
Output OK (Green LED), Fault (Yellow LED)
Output OK =
Fault =
⑩
PL1: 4-way display connector
⑪
Fault relay: isolated relay output
Change-over NO-COM-NC 1A@50V
⑫
PL2: high temperature output (unused)
Operates at approx 55
o
C internal box temp, 30V
200mA max current sink.
⑬
Battery fuse (F2): fast, glass
3.15A F, 20mm
⑭
Charge Off Input: Disablement of battery
charger when closed (unused)
⑮
Wiring loom to Display PCB (VPS-220-E
only)
VPS-215-E dimensions (H x W x D)
VPS-215-E weight (without batteries)
286 x 226 x 113mm
2.5kg
VPS-220-E dimensions (H x W x D)
VPS-220-E weight (without batteries)
351 x 255 x 110mm
3kg
VPS-215-E mounting
4 x Ø5mm holes on 220 x 180mm centres
VPS-220-E mounting
4 x Ø5mm holes on 270 x 180mm centres
Temperature range
Maximum relative humidity (RH)
Ingress protection (IP) Rating
-5
o
C to +40
o
C ambient
95% RH
IP30
