XtraLight VIENTO WALLPACK Page 4 Quick Manual Download

Page: 4 / 4

VIENTO WALLPACK

WIRING

Universal driver: 120VAC - 277VAC, 50/60HZ.

1. Verify that the electrical power to the Luminaire is in the OFF position.

2. Connect the fixture side Black lead to Line supply lead

3. Connect the fixture side White lead to Neutral supply lead.

4. Connect the fixture side Green lead to Green supply lead.

5. Energize the electrical power and verify proper operation.

IN0018 Rev. 1 11/14/2016

Summary of Contents for VIENTO WALLPACK

Page 2: ...e Hinges and set aside Figure 1 2 Make necessary holes in back plate gasket included with fixture Peel adhesive and adhere gasket to back of Back Plate Mount fixture Back Plate to wall as needed using surface mounted conduit or existing junction box Figure 2 3 Hang fixture housing back on hinges Figure 1 Figure 2 Hinges Housing Screws Spring Clip Back Plate Quick Disconnect ...

Page 3: ...ct supply wires to quick disconnect provided Follow wiring directions in Wiring section on next page 5 Swing fixture up and closed until Spring Clip snaps into place 6 Replace 4 Housing Screws 7 Turn power on DIMENSIONAL DATA ...

Page 4: ...o the Luminaire is in the OFF position 2 Connect the fixture side Black lead to Line supply lead 3 Connect the fixture side White lead to Neutral supply lead 4 Connect the fixture side Green lead to Green supply lead 5 Energize the electrical power and verify proper operation IN0018 Rev 1 11 14 2016 ...