60
Doc. 20780_03
Planning and Commissioning Manual
ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
The detector does not seem to work properly.
A previous version of the ADPRO PRO Windows® Software was used on the same
detector.
To display and use the factory default settings, follow these steps:
1.
Click (Factory), the following message appears:
2.
Click (Yes) to replace the values with the factory ones,
3.
Click (
) to save them in the detector’s configuration file.
10.3.4.2.4 Download
Settings
To download the detector’s settings, follow these steps:
1.
Make the changes you want,
2.
Select the detector,
3. Click
(
).
The configuration status is represented with the following symbols:
: Uploading
configuration
: Changed
configuration
: Communication
problem
: Downloading
configuration
10.3.4.2.5 Copy
Settings
To copy the settings of a detector and use them in another one, follow these steps:
1.
Select the detector which settings you want to copy,
2. Click
(
),
3.
Select the detector to which you want to apply the copied settings,
4. Click
(
).
10.3.4.2.6
Save Settings to CFG File
To save the configuration in the “CFG” sub-folder accessed through the ADPRO PRO
Windows® Software folder saved in the computer, follow these steps:
1.
Make the changes you want,
