Xtracycle RFA Utility, Assembly Manual, Page: 9 / 13

s
tep 7
• Locate the speed sensor post, washer and M5x20mm bolt
in the small parts box and mount to frame in the rear
position on the non-drive side with a 4mm Allen key
• Note: the rear mounting position is for Utility mode only
• Remove the cap to the speed sensor and position it on
the speed sensor post
7a 7b
Mounting the Speed Sensor
• Tighten the speed senor bolt with a T-30 star bit through
the wheel from opposite side
• Feed excess cabling into the drive housing and coil and zip
tie as needed
• Position sensor magnet on spoke opposite air valve and
align with the sensor
• Apply blue Loctite or comparable threadlocker and secure
with a Phillips head screwdriver
7c 7d