7
1
2
3
4
8
5
7
6
6. MANAGING TAGS WITH OTHER ELECTRONIC/ELECTRICAL/XNOVA LOCKS
U S E R S
ATTENTION
: if no TAGS are memorized on the control unit (new lock or after a reset), any free Mottura TAG can be
used to enter programming mode!
You SHOULD IMMEDIATELY MEMORIZE first your master TAGS, then any
service TAGS, to guarantee maximum security.
After this operation, the control unit will accept only the memorized TAGS.
Present master TAG (1)
Present TAG (2) within 10 sec.
6.1 MEMORIZING MASTER TAGS
Press 1
Press 1
Press E (LED flash alternately)
Memorization
MASTER TAG
TAG already
memorized as
MASTER
TAG already
memorized as
SERVICE
The system returns to point 6. To exit, press "E" or wait 20 sec. (timeout).
SERVICE TAGS, if inserted,
are disabled
5. MANAGING TAGS WITH XMODE
ATTENTION
: See the lock user manual (chapter 5) for management of TAGS.
(1) If the lock is new or reset, any free Mottura TAG can be used to enter programming mode!
(2) Becomes MASTER TAG.
Activate the escutcheon
Press 1 then holding down 1 press E
