Xtool H6PRO User Manual Download Page 5

Page: 5 / 91

III

⚫

Please keep it away from water, moisture, high temperature, or very low
temperature.

⚫

If necessary, calibrate the screen before testing to ensure the accuracy of LCD
performance.

⚫

Keep the main unit away from strong magnetic fields.

⚫

Please keep your device always connected to the Internet. When the device is off
the Internet for 30 days, The diagnosis APP may be locked and you need to
synchronize data with the Internet to activate it.

FTERSALES

-S

ERVICES

E-Mail: [email protected]

Tel: +86 755 21670995 or +86 755 86267858 (China)

Monday through Friday

09:00~18:30

（

UTC/GMT+08:00

）

Official Website: www.xtooltech.com



Please provide your device serial number, VIN code, vehicle model, software version,

and other details when seeking technical support. If there are screenshots or videos, it will
better help us locate your problem.

Summary of Contents for H6PRO




























































































Search results

Summary of Contents for H6PRO

Reviews:

Brands by name

Popular brands

Xtool H6PRO, User Manual

Search results

Summary of Contents for H6PRO

Reviews:

Brands by name

Popular brands