Xtool D1 Pro, Quick Start Manual

Page: 26 / 27

Set the support module Clean the laser module
Turn the knob clockwise to move the
support wheels upward
1. Turn off the device and remove the
laser module from the device.
2. Remove the nozzle and its connector from the laser module.
When the light shield is dirty or laser beams can't cut a material, you need to
clean the laser module.
Turn the knob counterclockwise to
move the support wheels downward
40 39
For the 20W laser module, you are advised to clean it, including the
inner and outer frames of the light shield, lens, and red light outlet,
every time after it has been used for one consecutive hour.
Tips