A80 BT Intelligent Diagnosis System
55
2 control component action test;
3 Each control element operates simultaneously to control the test;
4 Develop component motion command control test;
5 numerical reading analysis instructions;
6 Reset the microcomputer memory command.
When diagnosing the car, you can use the jumper on the diagnostic
stand directly into the different diagnostic holes, and press the buttons
on the diagnostic stand to select various specific diagnostic modes by
pressing 1 to 6 respectively.
To clear the fault code, first insert the diagnostic jumper into the
corresponding diagnostic hole of the system to be diagnosed, set the
ignition switch to ON, and read the fault code first, until all fault codes
are displayed, the LED light is continuously on. From then on, press and
hold the diagnostic button for more than 5 seconds to clear the fault code.
Crown auto ABS fault self-diagnosis system
The new Crown sedan uses an anti-lock braking system (ABS). If
the system fails, the fault self-diagnosis system in the anti-lock braking
system will identify the fault that occurred, and the microcomputer
(ABSECU) will represent the fault. The code is stored and the fault
message is communicated to the owner via the ABS warning light