Page
rePlaCeMent PartS and aSSeMbly drawinGS
The Replacement Parts and Assembly Drawings contains two sections. The first section lists all of the replacement parts that are available
for purchase. For your convenience, each replacement part is shown, along with the XTM Racing order number, a description, quantity
amount per pack, and the corresponding step number that the replacement part is shown in to cross-reference the parts using the as-
sembly drawings. The second section details the assembly of the X-Crawler ARR. Detailed illustrations in a step-by-step format make it
easy to disassemble and reassemble the X-Crawler ARR. This is useful when it’s necessary to replace worn/damaged parts or when it’s
time for a complete teardown for cleaning.
when it comes time to order replacement parts, we recommend ordering directly from your local hobby retailer.
if your hobby
retailer does not stock XtM racing products, contact your closest distributor for a local dealer, using the Customer Service
information on page 3.
rePlaCeMent PartS (PaGeS 16~17)
aSSeMbly Manual (PaGeS 18~23)
The stock tyres and foam inserts included will work well for most users, however, you may want to experiment with different tyres and
foam inserts, or even experiment with cutting the stock foam inserts. The X-Crawler is a Super Class crawler and uses 'Maxx' size wheels.
When choosing different tyres, you should look for a tyre that suits your driving style and the terrain you're driving on. In general, you
want the softest tyre available with an aggressive tread pattern. This type of tyre will provide the best traction in most situations.
tyreS and FoaM inSertS
Regarding the foam inserts, you want to use foam inserts that are just firm enough
to support your X-Crawler ARR, but soft enough that the tyre can compress easily to
ensure maximum traction. If the foam inserts are too stiff and don't allow your tyres to
compress adequately, you can cut them. The most popular methods are to either cut
the sides of the foam inserts to allow more sidewall flex or cut them into a star shape
to allow easier compression of the tyre. In most cases, these techniques will provide a
good combination of support and easy compression to ensure maximum traction.
XtM Part nuMber
deSCriPtion
PaCK Qty
aSSeMbly loCation
146820
Chassis Side Plate
2
Step 4
146821
Chassis Bottom Plate
1
Step 4
146822
Chassis Upper Plate
1
Step 4
146823
Chassis and Shock Support Rod
2
Step 5
146824
Side Plate Spacer Rod
2
Step 4
146825
Linkage Rod (No Ball End)
2
Step 5
146826
Ball End
2
Steps 3 and 5
146827
Ball for Shock End
4
Step 5
146828
Shock Mount
2
Step 5
146829
Linkage Rod with Ball End
1
Step 5
146830
Linkage Rod with Ball End and Shock Mount
1
Step 5
146831
Body Mount
2
Steps 4 and 6
146832
Body Clip
4
Step 6
146833
Shock Assembly - Complete
1
Step 5
146834
Shock Mounting Bushing
6
Step 5
146835
Antenna Holder
1
Step 4
146836
Tapered Collet (Triangle Washer)
4
Steps 3, 5 and 6
146837
Gearbox Housing
1
Step 1
146838
Gearbox Cover - Left
1
Step 1
146839
Gearbox Cover - Right
1
Step 1
146840
Spur Gear - 40T
1
Step 2
