XTline XT60814, Original Instruction Manual

Page: 27 / 30

4. INTENDED USE
The product serves as a portable light source, workshop and assembly lamp for lighting or
illumination of poorly lit areas in the workshop, home, garden, during leisure activities, etc.
Use of the product for any purposes other than those specified is not permitted.
5. ASSEMBLY AND OPERATION
Before starting and using for the first time, make sure that the product is undamaged, contains all
the listed components and does not show any signs of damage, such as scratches, cracks, visible
discoloration of certain components, etc.
The cordless work light is equipped with strong magnets, a hook for hanging and a tilting stand
with an adjustable angle of up to 180°. The rubberized design ensures comfortable handling and
partial resistance against minor shocks and careless handling. The main light is complemented
by a practical front LED for direct light. The work light offers a practical USB-C charging port and
a light indication of the charge level. The charger and cable are included in the package.
LIGHTING MODES
To set or change the lighting mode, press the rubberized button on the back side of the work light.
Each press changes the lighting mode to the next value. The individual modes can be selected in
the following order:
•
low

high

front LED

OFF
TIP!
• If you press and hold the button to change the mode, the currently selected lighting mode
will be gradually dimmed.
OPERATING INSTRUCTIONS
•
Avoid dropping the light on the ground and contact with sharp objects and heat sources.
In particular, avoid any damage to the transparent light cover.
•
The flashlight may heat up during operation, lighting or charging. We do not recommend
continuous operation - the lamp may get damaged. Never cover the flashlight while
operating or charging.
• Never point the light beam directly into the eyes of other people or animals.
•
If you use or charge the light at temperatures below 0 ̊ C or above 40 ̊ C, the performance
of the device may decrease.
•
Protect the flashlight from water and rain.
• The flashlight may only be operated and used by persons who have familiarized
themselves with all the instructions given in this user manual, with sufficient qualifications
and in compliance with all safety instructions and regulations valid and applied at the time.