CLEAN
Clean the equipment from the outside.
Flush with clean water. Use brush and detergent to remove stubborn pollution.
Immerse the pump into a container with clean water, open it for running a while, and
flush it in the pump.
Storage
If there is a risk of frost, remove equipment and accessories, and clean and store it a
place protected from frost.
Using scope
The pump is mainly used in a basement. When installed at the bottom of the shaft, the
pump prevents seeper in the basement. It can also be used for water supply and
drainage, such as household, agriculture, gardening, pipelines and other suitable
occasions.
Process equipment
Products marked with adjacent symbols shall not be treated as domestic rubbish.
You must deal with these old electrical and electronic equipment separately.
Please contact local authorities to see if they can be handled properly. Make the old
equipment available for recycling,pro-cessing, or other forms of second use by
separate handling. You can avoid polluting the environment by doing so.
Disposal packaging
The packing is made of cardboard and corresponding marking plastic. These
materials can be recycled.
Attention:
Before using the pump again, first "clean" to pre-vent any
possible dirt residue which could affect the equipment operation.
Attention!
Risk for equipment damage!
Frost will destroy electrical appliances and accessories, because
they always contain water.
