-
Support long materials to decrease a block and recoil danger
-
Keep the saw disc sharp
-
Do not force the tool
-
Do not remove the saw disc from the tool until fully stopped
-
Never place your hands and fingers under the saw
-
Make sure the proper tightening of cutting depth and cutting angle is set prior to operation
-
Pay attention to nails and other metal parts in the cutting material
Caution
It is essential to safely secure the cutting material and hold the tool firmly in order to keep the control over the
tool and so avoid a potential injury. In case the material is short or too small, secure it with clamps. Never hold
short materials with your hands! Never use the tool when fixed in a vice with the saw disc facing up! Prior to
putting the tool aside, always make sure that the saw disc cover is completely closed and the saw disc is fully
stopped.
Operation
