XTline XT106005, Manual

Page: 23 / 25

1. Chuck SDS Plus
2. Dust protection
3. Grip
4. Drill switch, Impact switch, cutting switch
5. Trigger
6. Trigger lock
7. Direction of rotation switch
8. Power cord
4. Prior to operation
- The user shall read and understand the manual prior to the first use in
order to secure safe manipulation
- Keep the manual ready to use
- If you wish to sell the tool, you shall attach this manual as well
- Be aware of all safety instructions!
- Keep the tool away from children and unauthorized individuals
- Check the functionality of all parts and protective elements
- Disconnect the power cord prior to any maintenance
5. Use
Grip adjustment
Make sure to always use the grip. Adjusting the proper grip position secures
further safety and proper tool handling. Rotate the grip counterclockwise to
loosen and set the grip in requested position. Make sure the grip is secured
and tighten.
Tool replacement
Clean the chuck before operating and lightly lubricate the tool. Insert the tool
into the chuck with rotation motion until secured. Check by pulling. Remove
the tool by holding the chuck sleeve and pull out to the opposite direction.