6. FUNCTIONAL DESCRIPTION
WORK MODE ADJUSTMENT
The work mode switch (
7
) is used to switch between individual levels of torque setting -
level 1
to
3
(right direction of rotation), level
HARD
and
SOFT
(left direction of rotation). Each of the
selected stages offer different values of the tightening and loosening torque.
DIRECTION OF ROTATION SWITCH
The direction of rotation switch (
2
) is used to set the direction of rotation of the clamping square
drive to the left or right, as well as to lock the main trigger (center position).
LED WORK LIGHT
The LED light (
4
) is located on the lower part of the device directly under the handle and is used
for better lighting of the work area.
TRIGGER
The main trigger (
3
) is the basic control element of the device and is used to regulate the speed of
rotation.
CLAMPING SQUARE DRIVE
The clamping square (
1
) is used to clamp a
1/2" working tool.
HANDLE
The ergonomic, rubberized handle (
5
) serves
for a firm grip on the device.
BUCKLE
The clip (
6
) located on the side of the tool is
used for hanging on the tool belt.
VENTILATION SLOTS
The ventilation holes (
8
) on the side of the
device are used for proper cooling of the
motor.
Summary of Contents for XT102830
