Charging a lithium-ion rechargeable battery with the charger
Remove the rechargeable battery from the machine by pressing the button. Pay attention to mains
voltage when charging the battery! The mains voltage must match the data on the charger label.
Put the plug into the socket. The green LED will light up. Put the depleted rechargeable battery into
the charger. the red LED will illuminate. Once the battery is fully charged, the red LED will go off
and will turn green.
See explanation table:
If the battery cannot be charged, check the following:
• contact voltage
• makes good contact with the charger contacts
If the battery cannot be charged again, visit an authorized service center.
Protection from environmental impact.
Protect the charger from moisture and rain. Moisture and rain can cause dangerous damage.
Do not use a charger or battery near flammable vapors and liquids.
Use the charger only in dry places and at an ambient temperature of 0-45℃. 3.4. Do not store the
charger in places where the temperature may reach above 30 °C. In particular, do not leave the
charger in a car parked in the sun.
Charge the charger. Terms of use
Store the charger only in a dry place and at an ambient temperature of 10-30 ° C.
Protect them from moisture and direct sunlight. In use, use the charger only in a dry place and at an
ambient temperature of 0-45℃.
Protection of the environment.
In order to protect the environment, the power tool and the packaging must be subject to appropriate
processing for the re-use of those contained therein raw materials. Do not dispose power tools in
household waste! Under the Directive of the European Union 2012/19 / EC on end-of-life electrical
and electronic equipment devices and the endorsement and as a national law the power tools they can
not to be used more, must be collected separately and subjected to the appropriate processing for
recovery of the raw materials contained therein.
