background image

22

MANUFACTURER’S LIMITED WARRANTY

Effective August 15, 2016 - TREADMILL LIMITED WARRANTY

XTERRA Inc. warrants all its home use treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales re-
ceipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. XTERRA’s responsibilities include providing 
new or remanufactured parts, at XTERRA’s option, and technical support to our independent dealers and servicing organizations. In the absence 
of a dealer or service organization, these warranties will be administered by XTERRA directly to a consumer. The warranty period applies to the 
following components:

Home Use Limited Warranty

Frame 

 Motor 

 Parts 

 Labor 

Lifetime   

1 Year 

 

90 days   

90 days

NORMAL RESPONSIBILITIES OF THE CONSUMER

This warranty applies only to products in ordinary household use. The consumer is responsible for the items listed below:
1.  The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase to 

validate the manufacturer’s limited warranty.

2.  Proper use of the treadmill in accordance with the instructions provided in this manual, including maintenance.
3.  Proper connection to a power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house/facility 

wiring.

4.  Expenses for making the treadmill accessible for servicing, including any item that was not part of the treadmill at the time it was shipped 

from the factory.

5.  Damages to the treadmill finish during shipping, installation or following installation.

EXCLUSIONS

 

This warranty does not cover the following:
1.  CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULT-

ING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some states do not allow the exclusion or limitation 
of incidental or consequential damages, so this limitation or exclusion may not apply to you. 
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not 
apply to you.

2.  Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in 

workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period, for 
treadmills not requiring component replacement, or treadmills not in ordinary household use.

3.  Damages caused by services performed by persons other than authorized XTERRA service companies, use of parts other than original 

XTERRA parts, or external causes such as alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, 
or acts of God.

4.  Products with original serial numbers that have been removed or altered.
5.  Products that have been; sold, transferred, bartered, or given to a third party.
6.  Products that are used as store display models.
7.  Products that do not have a warranty registration on file at XTERRA, Inc. XTERRA reserves the right to request proof of purchase if no 

warranty record exists for the product.

8.  Product use in any environment other than a residential setting.
9. 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.

SERVICE

Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as  
determined by the serial number establishes the warranty period should service be required. If service is performed, it is in your best interest 
to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state. 
Service under this warranty must be obtained by following these steps, in order:
1.  Contact your selling authorized XTERRA dealer. OR
2.  Contact your local authorized XTERRA service organization.
3.  If there is a question as to where to obtain service, contact our service department at (870) 336-4286.
4.  XTERRA’s obligation under this warranty is limited to repairing or replacing, at XTERRA’s option, the product through one of our authorized 

service centers. All repairs must be preauthorized by XTERRA. If the product is shipped to a service center freight charges to and from the 
service center will be the customer’s responsibility. For replacement parts shipped while the product is under warranty, the customer will 
be responsible for shipping and handling charges. For in-home service, the customer will be responsible for a trip charge. There will be an 
additional trip charge if the customer is located over 100 miles from the nearest service center.

5.  The owner is responsible for adequate packaging upon return to XTERRA. XTERRA is not responsible for damages in shipping. Make all 

freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHO-
RIZATION NUMBER. All units arriving without a return authorization number will be refused.

6.  For any further information, or to contact our service department by mail, send your correspondence to:

XTERRA
P.O. Box 2037

Jonesboro, AR 72402-2037

Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by XTERRA, Inc. This 
warranty applies only in the 48 contiguous United States. NOTE: This does not apply to Alaska or Hawaii.

Summary of Contents for TR200

























Reviews: