background image

2018/5/4V1.0+V1.0 

32

 

To set up the Fit Test 

  Press the FIT TEST button repeatedly until the FIT TEST option appears in the 

message center. Press ENTER to select the FIT TEST option. 

  The message center will prompt for a user weight, age and gender . Use the 

NUMERIC KEYS or UP/DOWN ARROW KEYS to input the weight, age and 

gender. Press ENTER to confirm. 

  The message center will next prompt for a workout level (ENTER SPEED)(2-4.5 

mph). Consult the following recommended fit test level chart for an appropriate 

effort level based on your age, gender and activity level. Use the NUMERIC 

KEYS or UP/DOWN SPEED ARROW KEYS to enter the corresponding level. 

After the five-minute FIT TEST is completed, a FIT TEST score will be displayed. 

Fit Test Program Suggested Exertion Levels 

 Inactive 

Active 

Very 

Active 

2-3mph 3-4mph 3.5-4.5mph 

Treadmill Fit Test 

Level 

3.2-4.8kph 4.8-6.4kph 5.6-7.2kph 

NOTE: Treadmill will incline to 5% after a one minute warm-up. 

Suggested exertion levels should be used as a guideline for setting up the Fit Test 

program. The goal is to elevate the user's heart rate to a level that is between 60%-85% of 

their theoretical maximum heart rate. 

Active Levels And Range   

Lower Half of Range 

Upper Half of Range 

higher age 

lower age 

lower weight   

higher weight * 

shorter taller 

In cases of excessive weight, use lower half of range. 

The program will not accept: 

Summary of Contents for TL200










































Reviews: