FS380 Elliptical
11
4
1. Take 2 of Slide Wheel Covers
(68)
and 2 of the Phillips Head Screws
(84)
and use the Phillips Head Screw Driver
(120)
.
2. Attach the front
(69)
and rear
(70)
handle bar covers together on the left
swing arm shaft and use 3 Sheet Metal Screws
(86)
and secure with
Phillips Head Screw Driver
(120)
. Repeat on the right side on handle bar
covers
(71)
and
(72)
.
3. Hammer 4 Oval End Cap
(45)
into Main Frame 4 corner by plastic
hammer.
Plastic Covers
4
Plastic Covers
1. Install the 2pcs of Slide Wheel Covers (68) and the 2pcs of M5 × 15mm_Phillips Head
Screws (84) by using the Phillips Head Screw Driver (120).
2. Attach front (69) and rear (70) handle bar covers together on left swing arm shaft and
use three 3.5 × 12m/m_Sheet Metal Screws (86) to secure with Phillips Head Screw
Driver (120). Install them the way for the right side on handle bar covers (71) and (72).
3. Knocked 4 Ø40 × Ø80_Oval End Cap(45) into Main Frame 4 corner by plastic hammer.
#84
. M5 x 15mm
Phillips Head Screw
(4 pcs)
#86
. 3.5 x 12mm
Sheet Metal Screw
(6 pcs)
Hardware Step 4
