Customer Service 1-888-707-1880
Dyaco Canada Inc
10
How to Fill and Empty the Tank
Remove the Fill Plug (No. 50) from the Upper Tank (No. 24).
To fill the tank with water, refer to Fig. A. Insert the Funnel (No.52) into the tank, then use a
cup or the Siphon Pump (No.53) and a bucket to fill the tank. Use the water level gauge on
the side of the tank to measure the desired water level in the tank.
To empty the tank, refer to Fig. B. Place a bucket next to the rower and use the Siphon Pump
(No.53) to pump the water from the tank into the bucket.
Insert the Fill Plug (No.50) into the Upper Tank (No.24). Wipe the excess water off the frame.
Note:
Fill the tank only with tap water. Add 1 water-purification tablet (not included). Never use pool
chlorine or chlorine bleach. This will damage the tank and void the warranty.
Add water purification tablet every 6 month or as needed. If water remains cloudy, replace the
water in the tank.
Water from the tank is not suitable for consumption. Dispose of the water after pumping it out
of the tank.
WATER LEVEL:
See Fig. A. The water level gauge is on the side of the tank. The maximum fill level is 6.
Never fill it over the limit. Filling the tank over this limit will void the warranty.
The resistance depends on the water level in the tank. Water level 2 is the lowest resistance.
Level 6 is the highest resistance.
