13
Customer Service 1-888-707-1880 Dyaco Canada Inc. 2018
Email: [email protected]
POWER UP
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not operate without it. The treadmill will then enter idle mode, which is the starting
point for operation.
QUICK-START OPERATION
1. Attach the Safety Key to enable the display (if not already on).
2. Press the Start/Stop key to begin belt movement. Adjust to the desired speed using the speed
▲
and
▼
keys (console or handgrip). You may also use the Quick Speed Keys 1 -10 to adjust the speed.
3. To adjust deck incline, press the
▲
/
▼
incline key (console or handgrip) to the desired incline level.
You may also press the Quick Incline Keys 0 - 10 to adjust.
4. To stop the treadmill, press Start/Stop Key or pull out the Safety Key, though we encourage you to
use the Start/Stop Key
FUNCTIONS
Pause / Stop / Reset
1. When the treadmill is running, the pause feature may be utilized by pressing the Start/Stop key once.
This will slowly decelerate the tread belt to a stop. The incline will go to zero percent. The Time,
Distance, and Calorie readings will also stop.
2. To resume your workout, press the Start/Stop key. The speed and incline will return to their previous
settings.
3. If the ENTER key is pressed while paused, the console will reset and return to the idle mode (startup)
screen.
INCLINE FEATURE
1. The incline may be adjusted anytime after the belt begins to move.
2. Press and hold the Adjust incline
▲
/
▼
keys on the left side (console or handgrip) to achieve your
desired incline. You may also choose a more rapid increase/decrease by selecting a Quick Incline Key
0 - 10 on the left-hand side of the console (incline).
3. The display will indicate incline position as adjustments is made.
Pulse Grip Feature
The Pulse (Heart Rate) readout will display your current heart rate in beats per minute during the workout.
You must use both stainless steel sensors on the handlebar to display your pulse. Pulse value displays
anytime the upper display is receiving a pulse signal.
Calorie Display
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions, which cannot be used
for medical purposes.
To Turn Treadmill Off