Dyaco
Canada
Inc.
2017
12
TREADMILL
OPERATION
Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply
silicone spray or other substances to the walking belt or walking board. Such substances will
deteriorate the walking belt and cause excessive wear.
How to plug in the power cord
.
GROUNDING INSTRUCTIONS
.
This product must be grounded. No plug adapter should be used with this product.
WARNING
:
Improper connection of the equipment grounding conductor can result in a risk of an electric
shock. Check with a qualified electrician if you are
in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the
product, if it will not fit the outlet; have a proper
outlet installed by a qualified electrician. The use of
an extension cord with this product is not
recommended. If an extension cord is needed, use
a short (less than 10 feet) heavy gauge (14 gauge
or better) extension cord with a three prong
(grounded) plug and receptacle.
IMPORTANT:
If the power cord is damaged, it
must be replaced with a manufacturer
recommended power cord.
1. Plug the indicated end of the power cord into the
socket of the treadmill. See drawing below.
2. Plug the power cord into an appropriate outlet
that is properly installed and grounded. See
drawing below. Important: The treadmill is not
compatible with GFCI-equipped outlets
.
Note: Your power cord and outlet may appear different