3
Statement
The instruction is for guidance only. Detailed information is in accordance with the product.
The instruction may include some technical inaccuracies or typographical error thought it is prepared with our
every effort.
The product or procedures described in the instruction may be changed or updated at any time without prior notice.
Screenshots used in the instruction are from the other machine and are only for indications and explanations.
For any doubts or to request documents about latest products and complementary notes, please consult with the
after-sales service department.
Precautions
The followings describe information about correct usage and risk prevention as well property loss prevention to be
strictly followed.
Please use web cameras in an environment within allowable temperature (-10°C to +55°C) and humidity.
Check if the power supply works normally before operation.
Do not furiously strike on the product and be careful not to fall it over.
Do not install the product in a dusty or moist place, or a place with strong electromagnetic radiation.
Do not place a container or others with liquid on the product or allow liquid to flow into inside the product.
When the product is left unused, place install the preventive dust cover for the image sensor.
Do not disassemble the product without authorization.
1. Login Interface
Type the IP address of the front-end device into the IE address bar to access to the Login interface, as shown in the
following figure:
Install Activex control. After entering the login interface, you will be asked to install the Activex control, as shown
in the following figure:
