Coax MDU Master Bridge User’s Guide
<10f>
: 10Mbps, full-duplex mode
<100h>
: 100Mbps, half-duplex mode
<100f>
: 100Mbps, full-duplex mode
swqos
[
-q
<queue>
[
-w
<weight>]
[
-d
<discard mode>]]
Display or set up the QoS configuration, include priority queue,
service weight and discard ratio while congestion, refer
Priority
for more.
<queue>
: select queue index (0~3) to configure, as q0(lowest
priority)/q1/q2/q3(highest priority)
<weight>
: assign the queue with service weight(1~15), defaut
1
for q0,
2
for q1,
3
for q2 and
4
for q3
<discard mode>
: choose the discard mode(0~3) for queue
utilization, default
0
for 0%.
1 for 25%, 2 for 50% and 3 for 75%. refer
Priority
for more.
swqostc
[
-s
<set>
[
-c
<act/deact>]
[
-p
<port>
-q
<queue>] ]
Display or set up the QoS configuration for TCP/UDP traffic
classification, to assign higher priority for total 8 different
TCP/UDP protocols
<set>
: rule set index, at most 8 set (0~7)
<act/deact>
: activate or de-activate this set
<port>
: TCP/UDP port number (0~65535),
<queue>
: select queue index (0~3) for this rule set, as
q0(lowest priority)/q1/q2/q3(highest priority)
tftp
-s
<ip>
-c
<get/put>
-f
<file>
Run TFTP client to get file (upload file onto XL-HCW128C) or
to put file (retrieve file from XL-HCW128C) from TFTP server
IP
<ip>
.
<get/put>
: run TFTP command ‘
get
’ or ‘
put
’
time
Display current System Time.
upep
[
-a
]
[
-m
<mac>]
[
-n
<note>]
Upgrade EP HCNA driver (stored in Upload Area), this
operation also synchronize EP with EP
Properties Profile
stored in XL-HCW128C,
-a: upgrade all on-line EP at once
-m: upgrade the EP with matched MAC
<mac>
-n: upgrade (matched MAC
<mac>)
EP ‘Note’ property
<note>
upmaster
Upgrade Master HCNA driver (stored in Upload Area), this
operation also synchronize Master HCNA device with its setting
values in
Properties Profile
.
upsys
Upgrade the uploaded system firmware (stored in Upload
Area), then reboot.
useradd
name
-p
<password>
-r
<ro/rw>
Create new management user account.
name: user name
-p: login password
-r: ‘
ro
’ for user has read-only privilege, ‘
rw
’ for user has read-
write privilege
userdel
name
Delete the management user account by name.
name: user name
users
Display all user accounts.
38
www.xtendlan.com
