XtendLan XL-EFM404V, User Manual

Page: 78 / 93

75
SSH (or Secure Shell) is a protocol that can be used to log into a remote machine (your V irtual Server) and pro vide
secure encrypted communications between your VON Router and your local computer. All of the commands you would
use in a Telnet client, you can use in an SSH client. The only difference is that the communication is made via encrypted
channels to and from your VPN Router.
Once you have chosen a SSH (or Telnet) client, connecting to your V irtual Server is extremely simple. Although SSH
(and Telnet) clients vary in their exact configuration, most of them will simply require you to specify a "remote host".
Your remote host is your VPN Router, so you would specify your domain name (or your temporary domain, if
applicable) or IP address.
Once you are connected, you will be prompted for your login name and login password. You specified both your login
name and login password when you ordered your VPN Router. After the login process is successful, you will have
gained access to your VPN Router and can now issue commands at the command prompt.
For SSH, you may change the default service port by typing the new port number. If you change the default port
number then you will have to let user who wish to use the service know the new port number. The default value is 2 2.
Press Apply to finish the setup.
3.7.8. Web
It can re-fresh web pages when you are viewing your dynamic status data pages. You can setup the refresh time from 2
to 30 seconds. The default value is 2 seconds.
For Web Browser, you may change the default service port by typing the new port number. If you change the default
port number then you will have to let user who wish to use the service know the new port number. The default value
is 80.
Press Apply to finish the
setup.