XtendLan XL-EFM404V, User Manual

Page: 14 / 93

11
The pin assignment of RJ-45 modular jack on the Console cable:
Pin Number Abbrev. Description Figure
1 DSR DCE ready
1 8
1 8
Front View
Top View
2 DCD Received Line Signal Detector
3 DTR DTE ready
4 GND Signal Ground
5 RXD Received Data
6 TXD Transmitted Data
7 CTS Clear to Send
8 RTS Request to Send
2.4 USB Port
Only for with USB ports models. This is using for connection of 3G/3.5G USB modem.
2.5 Power connection
Make sure you are using the correct power source as the AC/DC adaptor. Inset the female end of power adaptor’s
cord into the power receptacle on the rear panel. Connect the power adaptor to an appropriate power source.
2.6 Reset Button
The reset button can be used only in one of two ways.
(1) Press the Reset Button for two second will cause system reboot.
(2) Pressing the Reset Button for eight seconds will cause the product loading the factory default setting and losing
all of yours configuration. When you want to change its configuration but forget the user name or password, or if the
product is having problems connecting to the Internet and you want to configure it again clearing all configurations,
press the Reset Button for eight seconds with a paper clip or sharp pencil.