background image

3

Security

1. Notice for safety

1) Do not use water or volatile chemicals when cleaning the inside of the car or the product.This

may increases the risk of product damage, file, and electric shock.

2

Avoid causing the product severe impact and immersing it in a foreign substance.

3) If the user is in a tunnel or is driving at night, video recording cannot work properly. Intense

backligths also affect the image quality of the video.

4) Do not relocate the product arbitrarily. This may cause GPS communication error.

5) Refer all servicing to qualified service personnel. We take no responsibility for any damage or

problems caused by arbitrarily repairing or modifying the product.

6) Window tinting can also affect video quality. Users should check the recorded imagery before

operating the product, if their cars have tinted windows.

7) Do not cover the product when using other electronic devices. This may cause GPS

communication failure.

8) Do not approach magnets. This may cause machine fault.

9) Before taking out the SD card

insure the recorder is lay off. This may cause stoppage and data

loosing.

10

Do not insert foreign body into the SD card slot.

11

Use recommended SD card

we take no responsibility for quality of SD card. And SD card

belongs to consumable items, it may lose efficacy for a long use.

12

Power socket should be pulled up if the car not be used over 3 days.

13

Facility must be closed during installing (Insert the power plug when the installation is over).

14

Do not manipulate or stare at the product while driving. This may increase the risk of

automobile accidents.

15

The product should be fixed on the windshield tightly, make sure driving safety.

16

Temperature, humidity, dust, severe shock may cause machine fall.

17

Built-in battery, belongs to consumable items, it may lose efficacy for a long use.

18

Make sure to use the proper voltage .

12V-36V

19

Make sure installation of the product will not influence driving safety.

20) Do not install the product or change function while driving in order to prevent traffic accidents

from occuring.

21) Do not use this product in dangerous conditions where smoke or a burning smell is detected. In

such cases, deactivate the product and contact an agency. Remove dust in the cigar lighter socket

periodically, for it may result in a fire hazard.Check frequently whether the product is installed firmly.

If the product falls from its place, it may injure passengers or cause damage to the product.

22) Only use the cable and automobile electric power provided, as instructed. If not, this may

cause product damage, fire, and electric shock.

23) Electric quantity may reduce due to without using for a long time, to make the recorder work

properly, it would be a long time when the battery is filled.

24) Do not use the SD card supplied with the product for any other purpose. If the SD card is used for

another purpose or other files are stored in it, fatal errors may be caused. SD cards compatible with the

product can be allowed, but using different SD cards may result in product malfunction.  In  such

cases, the user is responsible for the problems.

Note

We do not take resposibility for any damage caused by an accident or carelessness.

Summary of Contents for MCDVR-480G
















Reviews: