12
Update Firmware
Can used to upgrade functions of the product (need manufacturer provide upgrade file, for free)
Update Instructions
Copy the update program to the SD card, then insert the card into the product. Enter into the main
menu, select 5.ETC Setup, and then select 4.Update Firmware, product can automatic updates.
Note:
Do not remove the power cable and do not turn off the engine
，
power off during the update
process may cause fatal error.
reset:
After finishing all the previous operations and power on, but this vehicle recorder still do not record,
please use a little pin press button (3), it will work normally when the machine restart. If it stil do not work,
please contact the local dealer.
5. Installing instructions
Turn off the engine before installating, and make sure that the windshied is clean.
•
Recommended installation position
：
It would be best to fix the product at the back of rearview mirrior of the frond glass, to avoid
affecting your sight. If could not, fix it on the left or ringht side of the rearview mirrior.
•
Designsketch for integral installation
The illustration above should be ajusted according to different cars.
Summary of Contents for MCDVR-480G
Page 1: ...1 USERS MANUAL MCDVR 480G...
