XtendLan IVS400A, IVS400B User’s Guide http://www.xtendlan.com
about 20 seconds, the new setting will work.
Default username : Administrator
Default password : 1234
* Only Administrator setup the setting in configuration.
Step 5
: Double click the picture in the window of
KIPEdit
or type the IP address in the IE browser, you can open the
web page of IVS400. If you can not open the web page of IVS400, be sure that you have installed IE 6.0 with SP1 or
later version.
NOTE
:
1.
After you have installed IVS400 on your PC, the IVS400 was registered in DirectX. IVS400 can be used as local
camera by any software that supported DirectX, such as MSN, Amcap, Media encoder, Yahoo Messenger as long as
you not change the directory path of ipcam’s driver.
2.
For those software that only supported old VFM driver, such as Vidcap and Netmeeting, please click
install VFM
device
, then you can get the captured images from IP IVS400 (you should be the administrator at the first install
process).
3.
For those not totally compatible with VFM, such as QQ and POPO, you should click
remove device
button first,
then click
install VFM device
, then you can get the captured images from IVS400.
4. Note: if stay for long time as in webpage , you would be unable setting and see message
“ Cookie time out “ ,
please go to IE to change setting: “ Tools “ “ Internet operations ” , please click “ Delete Cookies “ and
“Delete files “ in “ Temporary Internet file “.
- 9 -
