User Manual of XtendLan IVS-170BA Net Digital Video Server
3.1.2 Shell Commands Under Hyper Terminal
port.
Please use the DTE cable and the DB9/DB25 convertor to connect PC with DVS RS-232
Step 1:
Enter into the Hyper Terminal. Click “ Start”
→
“Programs”
→
“Accessories”
→
“Communications”
→
“Hyper Terminal”
→
“aa.ht”, the Hyper Terminal interface in Fig, 3.1.4 will
appear.
Step 2:
Press “Enter” in Hyper Terminal, the prompt “—>” appear, as in Fig. 3.1.7. Under this
prompt the following operation commands to accomplish the setup of the parameters.
Fig. 3.1.7 Hyper Terminal command prompt
Input help, the supported configuration commands can be checked up, as in Fig. 3.1.8.
Fig. 3.1.8 to check command
The following is the introduction of getIp, setIp commands.
- 16 -