XL-HB14128M HomePNA3.0 Switch User’s Guide
13
Note that Telnet connection will be terminated automatically if the telnet client doesn’t input any command for 5
minutes; i.e. the console idle timer is 5 minutes.
Use RS-232 Console Cable
To configure your XL-HB14128M switch by local console, do the following:
1. Connect ‘Console Cable’ to front panel Console ‘IN’ connector and then connect the cable to your PC serial port, as
COM1 or COM2.
2. Run a terminal emulation program as HyperTerminal in Windows. Its serial communication parameters should be
set to 115200bps baud rate, none parity bit, 8 data bit, one stop bit and none flow-control. As the following:
