17
Operation
“
-
” indicates current function not set or not open;“
√”
indicates the default setting of current
function;
“on”indicates the default mode of current function is on;“off”indicates the default mode of
current function is off;
Operation
As the baud rate and protocol are self-adaptive, the PTZ cameras may not response for seconds
on power up. It is recognizing the commands and adapting the setting.
IR / White Light
Auto Mode (For IR Version Only):
The default IR mode is auto. Auto mode can also be activated via preset 22. At this mode, the
commands of preset 30~33 are disabled.
When the zoom module is in mono, the camera will automatically turn on IR lights. The high beam
and low beam will be turned on/off as per the current zoom times.
When the module is in color mode, the camera will automatically turn off IR lights.
Manual Mode:
For IR version: Call Preset 21 to turn on the manual mode. The module will be switched into color
or mono mode. And lights can be controlled via the commands of presets 30~33.
For White Light version: Call Preset 21 to turn on the manual mode. The module will be switched
into color or mono mode. And lights can be controlled via the commands of presets 72 and 73.
[Note]
All lights are suggested to be turned off to protect the camera when temperature is
above 50
℃
.
Image Freeze
Call Preset 28 to turn on/off the function. When it is on, during a regular preset call (see following
picture), the video will be frozen at point A till Point B. At Point B, the video will be displayed
normally.
