75
Figure 6-9
6.2.6 Activate Pattern Function
In Figure 6-6 input mode value in the No. blank, and click pattern button.
6.2.7 Border
Setup
In Figure 6-5, click border button. The interface is shown as in Figure 6-10.
Please go to Figure 6-2, use direction arrows to select camera left limit, and then
please go to Figure 6-10 and click left limit button
Repeat the above procedures to set right limit.
Figure 6-10
6.2.8 Activate Border Function
In Figure 6-6, click auto scan button, the system begins auto scan. Correspondingly,
the auto scan button changes to stop button.
Click stop button to terminate scan operation.
6.3
Dome Menu Control
In Figure 6-6, click page switch button, the interface is shows as below. See Figure
6-11
Click menu to enter dome menu. The direction arrows here are to control dome
menu.
Click page switch button, system goes back to Figure 6-2.
Figure 6-11
