-4-
PARTS AND FUNCTIONS
Lock Control Jumper:
To select the lock type.
3P Connect Port:
1. If the external key module is detected online, the port will be
automatically as a communication port;
2. If there is no the external key module, it will check whether the PIR function is enabled. If the
PIR function is enabled, it will be as the detection port of the PIR;
3. When the above two cases are invalid, then as exit button port.
Main Connect Port:
To connect the bus line and the electronic locks.
•
L1,L2:
Connect to the bus line, no polarity.
•
PL:
External lock power input, connect to the power positive(power +).
•
S+:
Lock power(+) output.
•
S-:
Lock power(-) output, connect to the power(-) input of locks(only when using the door
station to power the locks, if using the external power supply for the locks, the S- will not be
connected).
1 2 3
Lock Control Jumper
3P Connect Port
+12V GND
PIR
L1 L2 PL
S+ S-
Main Connect Port
3. Install the name plate.
4. Attach the front panel to the rainy cover.
5. Use the special screwdriver and the screws to fix the panel.
Terminal Description
