XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
25
/
55
DSEO0711-2-V211119/UXP8401-PG.CC.GE.AR-CD7003/5~+45
℃
Chapter 3 Controller Descriptions and Operation
3
Fig 13
Use [NO] to escape HOME
（
Fig 11
）
, use [YES] to terminate the equipment operation completely.
3.7 Details for immediate Constant
Tap [DETAILS] in Fig 12 for screen of Details for Immediate Constant for display of PV and SV for
TEMP and HUMD, Sv for Visual Light and, if optional light sensors are incorporated,
measurements of Photosynthetic Photon Flux (PPF) and/or photometric illuminance (lux) and
OUTPUT for PID temperature and humidity control, level of visual light intensity, including
heater percentage, hot-gas bypassing valve steps, humidifying percentage and LED current ,
as well as accumulative operating hours after started-up (Fig 14), once equipment started up.
Fig 14
The normal values for OUTPUT of PID temperature, humidity and light control shall be ranged
between 10%~90%. Use [ESC] to escape and come back to HOME (Fig 11).
3.8 Display in curve or table
With different versions for temperature and humidity range of the equipment, the Y axis of the
temperature curve may be different to match the maximum and minimum temperatures.
