Remove Center Console Plastics and Rear Box Cover to run rear harness.
2.
Using the provided Self Tapping Screw mount the Control Module under the hood on the bar as shown. Since it
is small and light it can also be strapped to the main power harness with the included cable ties.
3.
Unroll the Rear Harness. Next to the air cleaner, unplug the 6-Way Connector (shown with white arrow) and
Plug the rear harness in-line. There is a Black and Red wire provided for power to an optional License Plate Light.
4.
From the 6-Way Plug, take the 4-pin connector down behind the battery, follow the factory wire harness to the
center console, all the way up to the Control Module and Plug-in. Keep it away from any
HOT or MOVING
parts.
Using the provided Cable Ties secure it to the main OEM wire harness
5.
Install Front LED Turn Lights, the front LED Turn Indicators can be mounted with the rubber grommet or without.
If the grommet is
not
being used drill 5/8” holes. If the grommet is being used drill ¾” holes. Remove and install
the rubber grommet from the LED into the hole if being used. Insert LED into the hole with the Top marking up.
NOTE: the TOP marking is on the front of the LED lens.
