Honda Turn Signal System
Thank you for purchasing XTC Power Products Automatic Self-Canceling Turn Signal System. Our Easy Install Turn Signal
System is unique from the other kits on the market. This kit is from our Plug & Play™ product line, with only connecting
power, ground and plugs into the OEM Tail Light Harness, utilizing the brake lights as Brake and Turn Signals.
Please read the instructions fully and familiarize yourself with the components before starting the install. Remember
that these are basic instruction and you can install in other locations if desired, so feel free to be creative. The only
two places that have to interface is at the Rear Wire Harness and at the AUX Power Port next to the Power Steering.
NOTE: When installing make sure that wires are run away from any hot or moving parts and properly secured.
1.
Remove the hood and the dash cover by removing 9 Allen Screws, this gives access to inside the Dash
