Page 20
DP6i
Operators Manual
Locking the Unit Remotely
Supplied with the
DP6i
is a remote locking program. This allows all the connected
units to have their front panel controls locked out, including the Mute Unit key and
the Quick Memory Recall keys.
Starting the program will display a window as shown below.
The connection should be the same as that used via Audiocore to control the unit –
please see the preceding sections for information about this. Audiocore remote
control is still possible when the unit is locked.
Pressing the ‘Lock Units’ button will ask for a password and confirmation of the same
password again. Pressing the ‘OK’ button will send this password to ALL connected
units and lock them. Confirmation of the lock is given by the units briefly showing
LC
on their displays. Note that the password is stored in each unit, so if it is
required to give a different password to each unit in a network, they will have to be
connected individually to the computer.
Note that shadow units will be locked at the same time, but must be connected
through a master for the program to work.
There is NO master unlock password – please contact XTA if you need to unlock
your unit. There is a procedure for achieving this (without losing the settings stored
in the unit), but you won’t find details of it here!
Unlocking units is as simple as pressing the ‘Unlock Units’ button, entering the
password, and pressing ‘OK’. Confirmation of the unit(s) unlocking is confirmed by
the display(s) briefly showing
uC
.
Summary of Contents for DP6i
Page 1: ......
