Rear Panel Functions
1.
Mains Power
- is connected via a standard IEC socket. A compatible power cord is
supplied with the unit.
2.
Mains Fuse
- is located in a finger-proof fuseholder adjacent to the mains inlet. Always
replace this fuse with the correct type as shown on the rear panel legend.
3.
Power Switch
- a double pole rocker switch isolates both live and neutral connections.
4.
MIDI
- In / Thru and Out connections are provided via standard 5 pin DIN sockets. See
page 15 for more information.
5.
XLR Inputs and Outputs
- Separate 3 pin XLR connectors are provided for each audio
input and output. All terminations are fully balanced where pin 2 = Hot, pin 3= Cold and
pin 1 = Screen (shield). See page 17 for more information.
6.
Digital Output 3+4 Switch
- pressing this recessed switch will route the AES digital
format of outputs 3 and 4 via output 3's XLR connector, if the AES/EBU option is fitted.
7.
Digital Output 1+2 Switch
- pressing this recessed switch will route the AES digital
format of outputs 1 and 2 via output 1's XLR connector, if the AES/EBU option is fitted.
8.
Digital Input Switch
- pressing this recessed switch will change XLR Input A to a 2
channel AES digital format input, if the AES/EBU option is fitted.
DP100 Page 4
Summary of Contents for DP100
Page 1: ......
