Change password :
SMS Command: $SMS,******;W001,######;! Description: change user’s password
Explain:
******: user password, the range of 6 digits, default password is 000000.
Example:
$SMS,000000;W001,123456;!
【
Note
】
Please switch to English input method when you editing command by phone;
Device will only accept commands from a user with the correct password. Command will
be ignored if with wrong password. ######: new password, the range of 6 digits.
Authorized number :
Set the authorized number by SMS
SMS Command: $SMS,000000;W010,NO.,Phone Number,ABC;! Description: Set
authorized number and related functions. Explain:
NO.: authorized number’s serial number, range of: 1~3.
Phone Number: authorized number, range of: 0~19 characters.
1.
A: switch for Geo-fence function, range of: 0~1(0 means disable this function, 1 means
enable this function), default is 0.
2.
B: switch for monitoring function, range of: 0~1(0 means disable this function, 1 means
enable this function), default is 0.
3.
C: switch for SOS emergency calling, range of: 0~1(0 means disable this function, 1 means
enable this function), default is 0.
For example:
Set the 1st authorized number is 13800000000 and just enable monitoring function.
$SMS,000000;W010,1,13800000000,010;!
Easy authorized phone no. setup by calling
Tracker only supports three authorized numbers. We can set the authorized number by
phone call if authorized number is not full (Disable all functions).
Set as follows:
Any non-authorization number calls to the tracker over than 10 seconds, the tracker will
cut off the line automatically and the Yellow Led will blink for 30 seconds. During this 30
second blinking, press SOS button less than 3 seconds, and then it set this call in number
as a new authorization number and send SMS to that number to confirm the setting OK.
Monitoring function :
If enable this function, when the authorization number call in to the device, it will connect to
the call and shut down the speaker, then the background voice of the device will be listened.
【
Note
】
Please make sure the SIM card installed supports displaying caller ID.
Two-way communication
:
If you turn the monitoring function off when set authorized number, use this authorized
number call to tracker, bell will ring, at this time, press the SOS button (less than 3s) to
answer the phone call, so you can speak each other.