1
、
Make sure the hand-held
controller has switched power
off to avoid damaging the
motherboard.Also turn off the
main switch on the battery.
2
、
Remove the battery in the
arrow direction as shown in
the picture.
Note: The fuse holder is
located below the battery
base. Spec: 40A.
The charging socket is located
under the battery.
3
、
Connect the charger.
4
、
Please refer to the charger
instruction on how to use it.
Note: Use a dedicated 24V
lithium battery charger, the
output voltage is:
DC 29.4V.
Charger hole
